5 Tips to Control Humidity in Pre Manufactured Homes

Manufactured Home For Sale
Humidity Control Tips

Moisture problems in your manufactured home are not just from the water that is seeping down from the leaks in your roofs. Moist air easily gets risen up from the ground and they easily come to your manufactured home through the openings in the ceilings, walls, and even the floor of your home. However, moisture can also be created by cooking, showering, and other indoor activities.

The wet air eventually condenses into water droplets when it hits on a surface. If the surface where the water droplets hit is absorbent such as drywall or insulation, then these water droplets get accumulated and gradually build up over time. Below are a few simple tips that will help you control the humidity in your manufactured home.

Install a Ground Cover

The best and most simplest preventive measure that enables you to prevent the accumulation of moist air under your manufactured home is to install a ground cover. However, it is significant to note that the ground cover does not have to seal every inch of soil. You will only have to cover the area as best as you can.

Seal Openings in the Belly Board

The plastic sheet, which wraps the bottom of several manufactured homes, are commonly known as belly board. The belly board offers an efficient moisture barrier at the bottom portion of most pre manufactured homes. So, inspect the belly board of your home and seal the openings, if any.

Seal Openings in the Ceiling, Walls, and Floor

If there are any smaller cracks around the doors, windows, and the ceiling of your manufactured home, then caulking will help you to easily fix the issue. On the other hand, if there are any openings in the floors of your home, you will have to seek the help of an experienced builder and ask them to fix the issue.

Eliminate Moisture Problems at the Source

Most of the moisture problems in manufactured homes begin when residents dump excess amount of water into the air by common household activities like bathing and cooking. Make sure to turn on your ventilation fans during these activities, as it will prevent the chances of moisture problems in your manufactured home.

Check your Cooling Equipment Filter

Clogged filters may interfere with the ability of your air conditioner to remove the moisture from the air. Additionally, in certain instances, it may even interfere with the condensate drainage and cause serious issues. So, check the filter of your cooling equipment at least once every month.